矗鑫电子设备
矗鑫电子设备
Home > Products > Curing equipment > Vertical curing oven >
< >

DR series vertical hot air curing oven

Numbering:DR-400/DR-250

Views

  •  Features:
     
    1. Significant labor saving——Compared with offline curing furnace, this machine is equipped with automatic loading and unloading, completely eliminating the labor of taking and placing products in offline curing furnace;
    2. Improve curing quality-Compared with offline curing furnace, there is no manual opening and closing of the furnace body when picking and placing the product, the temperature in the furnace is more stable, and the product quality is better;
    3. Significantly reduce the floor space-compared to the tunnel furnace or conventional SMT reflow oven in the horizontal transportation mode, the vertical furnace area with the same capacity is reduced by several times or even ten times;
    4. Improve energy utilization. The horizontal transportation mode of ^p or conventional SMT reflow oven makes full use of the basic principle of the upward movement of hot air, which makes the utilization of heat energy more fully;

     

     

     

  • Model DR-400 / DR-250 Note
    Applicable production range PCBA Curing production after product coating weight of the machine bed will increase according to the requirements of the custom layer
    Dimensions(LxWxH) mm 2500*1740*2240 / 2500*1550*2450  
    Weight(kg) Approx. 1800/ 1650  
    Heating time Approx.30minute  
    Temperature setting range Room Temp.180°C  
    Temperature control accuracy ±2.0°C  
    Control method PID closed-loop control+ SSR drive+ touch screen  
    PCB board temperature distribution deviation ±2.0°C  
     Furnace time According to product demand parameter setting  
    PCB maximum size(LxW) mm 400x400/300x250 Small plates can be used by curing trays, non standard size can be Customized
    Rail width adjustment range 100~400mm  
    Board space 25.4mm plate thickness - under the component height Can be customized with an integral multiple of 25.4 pallet spacing or other specifications of the chain, depending on the size of the chain, the board space will be different
    Transmission height(mm) 900±20mm Reference customer dispensing equipment

  • Copyright © 2020 Shenzhen Chuxin Electronic Equipment Co., Ltd. All Rights Reserved 粤ICP备09167204号